Characteristics of UHF transistors using autoregistered structures

The basis of a novel bipolar transistor structure was proposed by Dr R. Aubusson of Middlesex Polytechnic in 1977. The novelty lies in replacing the conventional overlay transistor's P+ base grid with a refractory metal grid, in order (a) to lower the base resistance and (b) to autoregister the emitter. It was claimed that the linearity of the transistor would also be improved. A number of questions raised by this idea have been investigated, the methods and conclusions of which are presented here. Plausible structures, using the metal base grid, are proposed and compared with conventional structures. Some advantages are seen to be possible. The current understanding of distortion analysis applied to transistors is reviewed. The main ideas are presented in a unified manner and are extended to higher order. A number of the transistor's second order effects are analysed in a novel fashion. The metal base grid transistor is analysed and compared with conventional transistors, with favourable results. Practical aspects of fabricating the metal base grid transistor were investigated. A procedure for deposition has been determined and is presented here along with the film physical and electrical characteristics. Analysis of the tungsten-silicon interface shows the suitability of the metallization as a base grid. Suitable means of delineating the tungsten film have been assessed and a working procedure determined. Subsequent deposition of various insulators has been investigated and the problems associated with the readily oxidized tungsten film have been overcome. Formation of the emitter, requiring further high temperature processing, has been assessed in view of the limitations imposed by the preformed base metallization. In summary, it has been shown that the novel structure can be constructed and that significant performance improvement is to be expected, although a full realization was not possible within the resource constraints of the project

NASA/MSFC FY-83 Atmospheric Research Review

Atmospheric research conducted at the Marshall Space Flight Center in FY 1983 is discussed. Clear air turbulence, gusts, and fog dispersal near airports is discussed. The use of Doppler Lidar signals in discussed, as are low level flow conditions that are hazardous to aircraft

The maxometer-dynamic and static tests

The ability to withstand extreme environmental conditions, such as the high flow velocities and extreme temperatures associated with the launch of aerospace vehicles, was considered in the developement of two maxometer models which are capable of measuring extremely high wind speeds (130 m/sec) and retaining a record of the peak speed over any given time period. The dynamic and static tests of these models are reported, along with pertinent results

Urspelerpes, U. brucei

Number of Pages: 3Integrative BiologyGeological Science

The effective acoustic environment of helicopter crewmen

Methods of measuring the composite acoustic environment of helicopters in order to quantify the effective acoustic environment of the crewmen and to assess the real acoustic hazards of the personnel are examined. It is indicated that the attenuation characteristics of the helmets and hearing protectors and the variables of the physiology of the human ear be accounted for in determining the effective acoustic environment of Army helicopter crewmen as well as the acoustic hazards of voice communications systems noise

Maxometers (peak wind speed anemometers)

An instrument for measuring peak wind speeds under severe environmental conditions is described, comprising an elongated cylinder housed in an outer casing. The cylinder contains a piston attached to a longitudinally movable guided rod having a pressure disk mounted on one projecting end. Wind pressure against the pressure disk depresses the movable rod. When the wind reaches its maximum speed, the rod is locked by a ball clutch mechanism in the position of maximum inward movement. Thereafter maximum wind speed or pressure readings may be taken from calibrated indexing means

Automatic signal range selector for metering devices Patent

Voltage range selection apparatus for sensing and applying voltages to electronic instruments without loading signal sourc